REQUINTO FROM ZERO EN ES IT

How to tune a docerola

A 12-string guitar (docerola, the guitar most requinto lead players use in Mexican regional music) is tuned to the same notes as a six-string. What changes is that every note gets two strings, and how you tune that second string decides your whole sound.

Quick answer

A docerola is tuned E A D G B E, from pair 6 (the thickest) to pair 1. Tune one string at a time, muting the other string of the pair with a finger, and always tune up to the note.

With unison pairs (cuerdas pares), both strings of each pair go to the same note. With octave stringing, on pairs 6, 5, 4 and 3 the thin string goes an octave higher; pairs 2 and 1 are always in unison.

If you want to play along with recordings tuned lower, you can drop everything a half step: E♭ A♭ D♭ G♭ B♭ E♭.

In this guide
  1. The tuning, pair by pair
  2. Unison pairs or octave stringing
  3. Step by step: all twelve strings
  4. Check it with the frets
  5. Half-step-down tuning
  6. Why it goes out of tune so often
  7. Frequently asked questions

The tuning, pair by pair

From the thickest pair, the one closest to your face when you play, to the thinnest:

PairNoteUnison pairsOctave stringing
6EE + E, the sameLow E + E an octave higher
5AA + A, the sameLow A + A an octave higher
4DD + D, the sameD + D an octave higher
3GG + G, the sameG + G an octave higher
2BB + B, the sameB + B, the same
1EE + E, the sameE + E, the same

Unison pairs or octave stringing

There are two common ways to string a docerola, and you need to know which one yours has before you tune.

Unison pairs (cuerdas pares)

Both strings of each pair go to the same note, on all six pairs. You get it by putting on two regular six-string sets. It's what many requinto players use in Mexican regional music, especially in sierreño (the guitar-and-bass style of the sierra), because it gives a thick requinto with a strong attack, as if two guitars were playing the same line.

Octave stringing

This is how many 12-string guitars come from the factory. On pairs 6, 5, 4 and 3, one of the two strings is thinner and tuned an octave higher. Pairs 2 and 1 are in unison. It sounds brighter and more open, more folk than sierra.

How to tell which one you have: look at the two strings of pair 6. If one is clearly thinner than the other, you have octave stringing. If they look the same, you have unison pairs. Switching from one to the other is a matter of strings, but sometimes the nut needs adjusting so the thicker strings fit well; if in doubt, ask a guitar tech.

Hear the difference, free

In the free lesson Meet the docerola, from the Docerola Foundations course, you hear pairs in unison and in octaves. To tune, use the free tuner: play each pair and see the note, no sign-up.

Open the tuner Open the free lesson

Step by step: all twelve strings

  1. Get your tuner ready. A clip-on tuner on the headstock, or the free tuner on your phone. Somewhere quiet.
  2. Pair 6, thick string: E. Mute the other string of the pair with a finger of your fretting hand and play only this one.
  3. Pair 6, second string. With unison pairs, to the same E. With octave stringing, to the E an octave higher.
  4. Pair 5: A. The thick string first, then the second one (the same A, or A an octave higher).
  5. Pair 4: D. Same as above.
  6. Pair 3: G. With octave stringing, the high string of this pair is the thinnest string on the whole guitar. Bring it up slowly, a little at a time.
  7. Pair 2: B. Both strings to the same note, with either stringing.
  8. Pair 1: E. Both strings to the same note, with either stringing.
  9. Play each full pair. If the two strings are almost the same but not quite, you'll hear a kind of wobble in the sound. Move the second string very slightly until the wobble slows down and disappears.
  10. Go around once more. As you tighten some strings, the neck gives a little and others go flat. Repeat from pair 6 to pair 1 until you don't need to move anything.

Always tune up to the note. If you go past it, drop well below and come back up. That way the tuning peg stays put and doesn't slip out of tune a few minutes later.

Check it with the frets

If you don't have a tuner handy, or to double-check, compare each pair with the one next to it. Press the fret shown and it should sound the same as the next pair open.

PressSoundsCompare with
Pair 6, fret 5APair 5 open
Pair 5, fret 5DPair 4 open
Pair 4, fret 5GPair 3 open
Pair 3, fret 4BPair 2 open
Pair 2, fret 5EPair 1 open

Notice that between pair 3 and pair 2 it's fret 4, not 5. That's the only exception in standard tuning. With octave stringing, compare the thick strings of each pair first; the octave strings are checked against their own partner.

Half-step-down tuning

Some musicians drop the whole guitar a half step. The most common reasons: playing along with a recording tuned that way, fitting the key to a singer, or having a little less tension on the strings.

PairStandardHalf step down
6EE♭
5AA♭
4DD♭
3GG♭
2BB♭
1EE♭

Your shapes don't change: you play the E shape and it sounds E♭. If you later want to sound in standard tuning again without retuning, put a capo on fret 1. For recordings that don't line up with any fret, see how to learn requintos by ear.

Why it goes out of tune so often

Twelve strings put a lot more tension on the neck than six, and the wood reacts to that force and to changes in the weather. It's normal to touch up the tuning several times in the first few days after a string change, because new strings are still stretching.

All tuned up? Play your first chords and the corrido rhythm with the guide how to play corridos on the 12-string, or open the free lesson Meet the docerola.

Frequently asked questions

How do you tune a 12-string docerola?
The same as a six-string guitar: E, A, D, G, B, E, from the thickest pair to the thinnest. The difference is that each note has two strings. With unison pairs, both go to the same note; with octave stringing, on pairs 6 to 3 one of them goes an octave higher.
What are unison pairs (cuerdas pares)?
It's when both strings of each pair are tuned to the same note, instead of an octave apart. You set it up with two regular six-string sets, and it's very common in Mexican regional music, especially in sierreño.
What's the difference with octave stringing?
With octave stringing, pairs 6, 5, 4 and 3 each have a thin string tuned an octave higher, and pairs 2 and 1 are in unison. That gives a brighter, folk-style sound. Unison pairs give a thicker requinto with more attack.
Which pairs are tuned in octaves on a 12-string guitar?
With octave stringing, the four low pairs: 6 (E), 5 (A), 4 (D) and 3 (G). Pairs 2 (B) and 1 (E) are always in unison.
Where do I start tuning?
With pair 6, the thick string first and then its partner, and from there on to pair 1. When you finish, go around once more, because tightening some strings loosens others.
How do I tune a half step down?
Lower every pair a half step: E♭, A♭, D♭, G♭, B♭, E♭. The chord shapes don't change; they just sound a half step lower. With a capo on fret 1 you sound in standard tuning again.
Can I use a phone tuner?
Yes, but many get confused with two strings ringing together. The safest way is to tune one string at a time, muting the other with your finger.

Learn requinto from zero

The first lesson of every course is free, with no card. Membership opens everything else:

Monthly

$19.99 / month

Yearly

$149 / year

Plans renew automatically at the price shown, plus applicable tax, until you cancel. Cancel anytime online from your account, and you keep access until the end of the period you paid for. Prices in USD. Paid plan availability varies by country. Terms

See plans Try a free lesson